This is a Kit with our custom Short rear narrow suspension arms and most parts needed for traxxas Jato. 
Traxxas Jato short arms Drag racing
 
You obviously will need to do some tweeking since these are shorter than stock. You will need (4) of the Traxxas Bandit style camberlink screws # 3647 for the camberlinks if you dont have them we do sell them.  You will need shorter shocks so are close to level at full droop. OR you can limit the shock travel by adding a piece of fuel tubing on the shock shaft inside hte shock.
 
These arms fit right onto the Jato and use stock inner hinge pins. No grinding is needed for these arms to fit the Jato.
 
NOTE: This kit works with the steel rear diff output cups. If you have the rectangle output shafts on your rear diff  that use the slide in plastic cups,then you need the Jato V2.0 short arm kit.
 
Kit includes he following parts:
RCRENEW V1 rear Jato short arms
Steel CVD axles ( axles may vary depending on inventory )
Bandit Rear hubs with bearings
RCRENEW Jato rear camberlinks (non adjustable)
Rear hub pins
 
Color may vary slightly-Manufacturing Material plastic